Table of Contents
Advertisement
XG2000 series User's Guide
4.2 Port Mirroring
It is possible to monitor the traffic by mirroring the frames sent or received by a port to another port.
To configure port mirroring, carry out the following procedure in the administrator EXEC mode.
xg# configure terminal
xg(config)# mirror monitored-port <1-20>
[rx-mirroring-port <1-20>]
[tx-mirroring-port <1-20>]
xg(config)# exit
xg# show mirror
Command
30/315
All Rights Reserved, Copyright (C) PFU LIMITED 2009
Task
Switch to global configuration mode.
Configure the port to be monitored and its mirror port to
be mirrored.
Exit to administrator EXEC mode.
View the status of port mirroring.
Advertisement
Table of Contents
