Fujitsu XG2000 Series User Manual page 244

XG2000 series User's Guide
% It failed in the snmpset command.
Explanation
It fails to set RMON because the command was executed while the SNMP manager was accessing.
Solution
While the SNMP is not accessing, execute the no command and set RMON again.
Note
An RMON event entry must be created using the "rmon event" command for log creation or SNMP trap notification to occur.
Example
Set RMON events:
xg(config)# rmon event 1 log trap public description "event test1" owner "admin"
xg(config)# rmon event 2 log description "event test2" owner "admin"
244/315
All Rights Reserved, Copyright (C) PFU LIMITED 2009