Table of Contents
Advertisement
XG2000 series User's Guide
5.16.9 monitor error
Function
Displays error traffic statistics for each port.
Prompt
xg> or xg#
Command syntax
monitor error { current | total } [interval <3-60>]
Parameter
{ current | total }
Specifies the statistics to be displayed.
−
−
If the error count reaches 4294967295, it is returned to 0 when incremented.
interval <3-60>
Specifies the update interval (in seconds).
The default interval is 3 seconds.
Command type
Operation management command
Output form (if "current" is specified)
xg# monitor error current
Error Statistics(Current Counts)
==================================================================================>
Port Rx
CRC
--- ---------- ---------- ---------- ---------- ---------- ---------- ----------
1 1234567890 1234567890 1234567890 1234567890 1234567890 1234567890 1234567890
2
3
4
5
6
7
8
=================================================================================>
ESC:exit
U:page up
(continues)
Error Statistics(Current Counts)
<======================================================================
Port-Description
------------------------------------
port_name1
port_name2
port_name3
port_name4
port_name5
port_name6
port_name7
<=======================================================================
ESC:exit
U:page up
Port
Displays the port numbers. Statistics for each port are displayed on one line.
Rx CRC
Displays the accumulated number of FCS (Frame Check Sequence) error frames received after
startup of this command.
Rx & Tx Over
Displays the accumulated number of frames whose size exceeds 1518 bytes (excluding the VLAN
tag) after startup of this command.
Rx & Tx Under
Displays the accumulated number of transmission frames whose size is less than 64 bytes after
startup of this command.
Rx & Tx Fragment
Displays the accumulated number of FCS (Frame Check Sequence) error frames whose size is
less than 64 bytes sent or received after startup of this command.
Rx & Tx Jabber
Displays the accumulated number of FCS (Frame Check Sequence) error frames whose size exceeds
1518 bytes (excluding the VLAN tag) sent or received after startup of this command.
current
Displays the accumulated error count after startup of this command.
total
Displays the accumulated error count after the system startup.
Rx & Tx
Rx & Tx
Over
Under
123
12
123
12
123
12
123
12
123
12
123
12
123
12
F:refresh
D:page down
L:page left R:page right
F:refresh
D:page down
L:page left R:page right
All Rights Reserved, Copyright (C) PFU LIMITED 2009
Rx & Tx
Rx & Tx
Fragment
Jabber
34
34
34
34
34
34
34
34
34
34
34
34
34
34
2007/01/22-12:12:15
221/315
2007/01/22-12:12:15
Rx
Total
Align
Lost
56
78
56
78
56
78
56
78
56
78
56
78
56
78
90
90
90
90
90
90
90
Advertisement
Table of Contents
