Show Statistics Error - Fujitsu XG2000 Series User Manual

XG2000 series User's Guide

5.16.18 show statistics error

Function
Displays statistics for errors occurring at each port after system startup.
Prompt
xg> or xg#
Command syntax
show statistics error
Command type
Operation management command
Output form
xg# show statistics error
Error Statistics(Total Counts) 2007/01/22-20:21:35
===================================================
[No.1]
Port
Rx CRC
Rx & Tx Over
Rx & Tx Under
Rx & Tx Fragment : 0
Rx & Tx Jabber
Rx Align
Total Lost
Port-Description : port_name1
[No.2]
[No.]
Displays statistics for each port.
Port
Displays the port numbers.
Rx CRC
Displays the accumulated number of FCS (Frame Check Sequence) error frames received after
the system startup.
Rx & Tx Over
Displays the accumulated number of transmission frames whose size exceeds 1518 bytes
(excluding the VLAN tag) after the system startup.
Rx & Tx Under
Displays the accumulated number of transmission frames whose size is less than 64 bytes after
the system startup.
Rx & Tx Fragment
Displays the accumulated number of FCS (Frame Check Sequence) error frames whose size is
less than 64 bytes sent or received after the system startup.
Rx & Tx Jabber
Displays the accumulated number of FCS (Frame Check Sequence) error frames whose size exceeds
1518 bytes (excluding the VLAN tag) sent or received after the system startup.
Rx Align
Displays the accumulated number of 64- to 1518-byte alignment error frames whose bit size
is not a multiple of 8 received after the system startup.
Total Lost
Displays the accumulated number of frames received but discarded at each port after the system
startup.
If the error count reaches 4294967295, the value is reset to 0 when incremented.
Port-Description
Displays port descriptions. If the port is not described, it will not display anything.
Up to 31 characters can be displayed.
: 1
: 0
: 0
: 0
: 0
: 0
: 0
231/315
All Rights Reserved, Copyright (C) PFU LIMITED 2009