Routing Configuration - Hayes ADSL Duo Modem User Manual

Action Drop discards the packet.
Bridge passes the packet to the bridge (normal
operation).
Connection passes the packet directly to the
WAN connection.
Click Update and then Save Configuration.

3.7 Routing Configuration

You can use the Routing Configuration page of your
Configuration Manager to define specific routes for your LAN and
Internet data.
Most users do not need to define IP routes. On a typical small
home or office LAN, the existing routes picked up automatically by
the ADSL Duo are the most appropriate path for your Internet
traffic.
However, you may need to define routes if your setup includes two
or more networks or subnets, if you connect to two or more ISPs,
or if you connect to a remote corporate LAN. Without a route
table, a computer on an additional network or subnet is invisible to
the ADSL Duo. The route table acts as a map for the modem, so
that it can direct traffic to the correct location.
The Routing Configuration page lets you add up to 20 static IP
routes.
53