If the modem found a match, you've finished! You are now
connected to the Internet.
2 2 2 2
If the modem didn't find a match using AutoPPP, some
users may be able to connect using the AutoBridge option,
even if they were given a User ID and Password.
a a a a
To use this option, select AutoBridge from the Protocol
list.
b b b b
The following field appears:
Virtual Circuit
c c c c
Click Update and repeat Steps 1b – 1d above.
When the modem connects, you are ready to explore the
Internet.
If and when you want to use your modem for online gaming,
continue on page 18.
If neither AutoPPP nor AutoBridge turns up a match for your
provider's settings, follow the instructions below.
Locating and Entering DSL Settings Manually If
AutoConfiguration Did Not Work
The DSL Internet Settings Tables beginning on page 77 show
the settings for the most commonly encountered service providers
in the US and many other countries.
If there is more than one setting for your service provider, the
most common is labeled (1), the next most common is labeled (2),
and so on.
1 1 1 1
Go to the tables on page 77 and find your service provider
on the list. If you are in the US and your service provider is not
on the list, follow the instructions using the settings for
Service Provider Not Shown at the bottom of the table.
14 Hayes ADSL Duo User's Guide
Accept the default, which is 0.
Need help?
Do you have a question about the ADSL Duo Modem and is the answer not in the manual?