Brother DCP-9010CN Service Manual page 560
Color fax/mfc
Hide thumbs
Also See for DCP-9010CN:
- Network user's manual (249 pages) ,
- User manual (215 pages) ,
- Quick start manual (6 pages)
Table of Contents
Advertisement
WSW26 (Function setting 4)
■
Selector No.
1
Not used.
2
Dialing during document reading into
3
the temporary memory in inmemory
message transmission
No. of CNG cycles to be detected
4
(when the line is connected via the
external telephone except in the
5
external TAD mode or via the built-in
telephone)
No. of CNG cycles to be detected
(when the line is connected via the
6
external telephone in the external
TAD mode, via the built-in telephone
7
in the TAD mode, or via the machine
in the automatic reception of the F/T
mode)
8
Not used.
- Selector 3: Dialing during document reading into the temporary memory in
inmemory message transmission
If this selector is set to "0," the machine waits for document reading into the memory to complete
and then starts dialing. This enables the machine to list the total number of pages in the header of
the facsimile message.
- Selectors 4 and 5: No. of CNG cycles to be detected (when the line is connected via
The machine interprets a CNG as an effective signal if it detects the CNG by the number of cycles
specified by these selectors when the line is connected via the external telephone except in the
external TAD mode or via the built-in telephone.
- Selectors 6 and 7: No. of CNG cycles to be detected (when the line is connected via
The machine interprets a CNG as an effective signal if it detects the CNG by the number of cycles
specified by these selectors when the line is connected via the external telephone in the external
TAD mode, via the built-in telephone in the TAD mode, or via the machine in the automatic reception
of the F/T mode.
Function
the external telephone except in the external TAD mode or via the
built-in telephone)
the external telephone in the external TAD mode, via the built-in
telephone in the TAD mode, or via the machine in the automatic
reception of the F/T mode)
App.1-27
Setting and Specifications
0: Disable
1: Enable
In the case of Selector 3=0 in WSW54.
No. 4 5
0 0: 0.5
(A)
0 1: 1
(B)
1 0: 1.5
(C)
1 1: 2
(D)
In the case of Selector 3=1 in WSW54.
No. 4 5
0 0: 2.5
(A)
0 1: 3
(B)
1 0: 3.5
(C)
1 1: 4
(D)
In the case of Selector 6=0 in WSW58.
No. 6 7
0 0: 0.5
(A)
0 1: 1
(B)
1 0: 1.5
(C)
1 1: 2
(D)
In the case of Selector 6=1 in WSW58.
No. 6 7
0 0: 2.5
(A)
0 1: 3
(B)
1 0: 3.5
(C)
1 1: 4
(D)
Confidential
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
