Worker Switch (Wsw) Setting And Printout (Function Code 10, 11) - Brother DCP-9010CN Service Manual

1.4.6

Worker switch (WSW) setting and printout (Function code 10, 11)

[1] Worker switch setting (Function code 10)
<Function>
The machine incorporates the following worker switch functions which may be activated with
the procedures using the buttons on the control panel cover ASSY. The worker switches have
been set at the factory in conformity to the communications standards and codes of each
country. Do not disturb them unless necessary. Some worker switches may not be applicable
in some versions. The worker switch data list indicates "Not used." for those inapplicable
switches.
■ Worker switch
WSW No.
WSW01
WSW02
WSW03
WSW04
WSW05
WSW06
WSW07
WSW08
WSW09
WSW10
WSW11
WSW12
WSW13
WSW14
WSW15
WSW16
WSW17
WSW18
WSW19
WSW20
WSW21
WSW22
WSW23
WSW24
WSW25
WSW26
WSW27
WSW28
Dial pulse setting
Tone signal setting
PABX mode setting
Transfer facility setting
1st dial tone and busy tone detection
Redial/Pause button setting and 2nd dial tone detection
Dial tone setting 1
Dial tone setting 2
Protocol definition 1
Protocol definition 2
Busy tone setting
Signal detection condition setting
Modem setting
AUTO ANS facility setting
Redial facility setting
Function setting 1
Function setting 2
Function setting 3
Transmission speed setting
Overseas communications mode setting
TAD setting 1
ECM and call waiting caller ID
Communications setting
TAD setting 2
TAD setting 3
Function setting 4
Function setting 5
Function setting 6
Function
7-9
Refer to:
App. 1-4
App. 1-5
App. 1-6
App. 1-7
App. 1-8
App. 1-9
App. 1-11
App. 1-12
App. 1-13
App. 1-14
App. 1-15
App. 1-16
App. 1-17
App. 1-18
App. 1-19
App. 1-19
App. 1-20
App. 1-21
App. 1-22
App. 1-23
App. 1-24
App. 1-24
App. 1-25
App. 1-26
App. 1-26
App. 1-27
App. 1-28
App. 1-28
Confidential