Brother DCP-9010CN Service Manual page 335

Assembling Note:
When assembling the Arm guide R onto the Top cover arm R, make sure to follow the
procedure described below.
1) Slide the Link push arm to the rearmost and insert Pin A of the Top cover arm R to "C"
of the Link push arm.
Pin A
2) Be sure to mount it by inserting Pin B of the Top cover arm R into "B" of the Arm guide R.
Joint cover sub ASSY
Top cover arm R
"C"
Link push arm
Joint cover sub ASSY
Fig. 5-118
Arm guide R
Arm guide R
Fig. 5-119
5-108
Arm guide R
Link push arm
Top cover arm R
"B"
Top cover arm R
Pin B
Confidential