Top Cover Arm L - Brother DCP-9010CN Service Manual

8.72 Top Cover Arm L

(1) Release the Hook to remove the TC arm pivot shaft from the Side frame L.
(2) Remove the Top cover arm L from the Side frame L.
<A view>
Top cover arm L
Side frame L
Assembling Note:
When assembling the Top cover arm L, make sure to fit the "A" of the Top cover arm L into
the "B" of the Top cover link 1 before assembling the Top cover arm L onto the Side frame L.
Hook
1b
1a
A view
Fig. 5-209
"A"
"B"
Fig. 5-210
5-167
TC arm pivot shaft
1a
2
Top cover arm L
Top cover link 1
Top cover arm L
Confidential