Brother DCP-9010CN Service Manual page 562

WSW29 (Function setting 7)
■
Selector No.
Compression threshold level for
1
voice signals inputted via the
l
telephone line in the built-in TAD
3
operation (Not used.)
Compression threshold level for
4
voice signals inputted via the handset
l
in the built-in TAD operation
6
(Not used.)
Impedance switching control in pulse
7
dialing (Not used.)
Prompt beep when the memory area
8 for the activity report becomes full
(Not used.)
Note:
Selectors 7 and 8 are applicable only to the European versions.
WSW30 (Function setting 8)
■
Selector No.
1
Dial tone/busy tone detection level
l
during recording of ICM (Not used.)
3
4
l Not used.
6
Scanning magnification adjusting
7
function (Not used.)
8 Not used.
Function
Function
App.1-29
Setting and Specifications
Setting and Specifications
Confidential