Toner Led Pcb Assy/Led Holder - Brother DCP-9010CN Service Manual

8.91 Toner LED PCB ASSY/LED Holder

(1) Press the Pin of the Side frame R, slide the Toner LED PCB ASSY in the direction of the
arrow 1b, and remove it.
Toner LED PCB ASSY
Side frame R
(2) Release the two Hooks to remove the four LED holder from the Toner LED PCB ASSY.
LED holder
Hook
Harness routing: Refer to
1b
Fig. 5-282
LED holder
Toner LED PCB ASSY
Fig. 5-283
" Develop Release Sensor PCB ASSY, Top Cover Open Switch,
Toner LED PCB ASSY."
5-209
Hook
Pin
Hook
Pin
1a
Hook
LED holder
Confidential