Brother DCP-9010CN Service Manual page 354

(5) Remove the LED ASSY from the Holder.
(6) Remove the other LED ASSYs in the same way as procedures (3) to (5) above.
LED ASSY
Sub frame ASSY
Assembling Note:
- The LED parts of the LED ASSY for replacement are covered with protection tapes.
Make sure not to remove the protection tapes until assembling of the LED ASSY is
completed. After it is assembled, make sure to remove the protection tapes.
- If the LED parts get smeared, make sure to wipe smears on the LED parts with a clean
and soft cloth.
LED ASSY
Holder
Fig. 5-147
Fig. 5-148
5-127
LED parts
Confidential