Serial Port Settings - D-Link DES-3326 User Manual

DES-3326 Layer 3 Fast Ethernet Switch User's Guide

Serial Port Settings

The Serial Port Settings screen allows the configuration of the
switch's serial port and out-of-band TCP/IP communications using
SLIP.
Highlight Serial Port Settings and press enter.
Figure 6-18. Serial Port Settings Screen
Toggle the Select Protocol:<
Console or SLIP protocol.
The following fields can then be set:
Auto-Logout - This sets the time the interface can be
idle before the switch automatically logs-out the user.
The options are 2 mins, 5 mins, 10 mins, 15 mins, or
Never.
Baud Rate - Sets the serial bit rate that will be used to
communicate the next time the Switch is restarted.
140
Configuring the Switch Using the Console Interface
> field to select either the