Remote Management Setup - D-Link DES-3326 User Manual

DES-3326 Layer 3 Fast Ethernet Switch User's Guide
Figure 6-14. Switch Information Menu
The Switch Information shows the type of switch (Layer 3),
which (if any) external modules are installed, and the switch's
MAC Address (assigned by the factory and unchangeable). In
addition, the Boot PROM and Firmware Version numbers are
shown. This information is helpful to keep track of PROM and
Firmware updates and to obtain the switch's MAC address for
entry into another network device's address table – if necessary.
You can also enter the name of the System, its location, and the
name and telephone number of the System Administrator. It is
recommended that the person responsible for the maintenance of
the network system that this Layer 3 switch is installed on be
listed here.

Remote Management Setup

Some settings must be entered to allow the switch to be managed
from an SNMP-based Network Management System such as
SNMP v1 or to be able to access the Switch using the TELNET
134
Configuring the Switch Using the Console Interface