D-Link DES-3326 User Manual page 262

DES-3326 Layer 3 Fast Ethernet Switch User's Guide
3. Move to the Status field, and use the Space bar to
select ENABLED.
4. Click APPLY to make the changes effective. Use Save
Changes to enter the configuration into NV-RAM.
Saving Configuration Changes
Clicking the APPLY button makes any configuration change
active, but only for the current session. If the switch is restarted
(rebooted) without entering the configuration changes into the
non-volatile RAM (flash RAM), the configuration changes will be
lost.
To enter configuration changes into the switch's non-volatile RAM,
select Save Changes from the main screen. Click on the Save
Configuration button to enter the current configuration into NV-
RAM. The configuration will then be loaded into the switch's
memory when it is restarted.
Figure 7-7. Save Changes Screen
Starting and Stopping the Web-based Manager
Do the following to use the web-based manager:
1. Start a Java-enabled Web browser from any
machine with network access to the switch.
(Preferred browsers include Internet Explorer
248
Web-Based Network Management