D-Link DES-3326 User Manual page 261

DES-3326 Layer 3 Fast Ethernet Switch User's Guide
Setting a Default Gateway
The default gateway parameter defines the IP address of a router
or other network device to which IP packets are to be sent if
destined for a subnet outside of that in which the switch is
operating. This parameter must be set if you are attempting to
manage the switch from a remote network or across the Internet.
1. Starting at the Main Menu of the User Interface, select
Configuration / IP Address.
2. Select Gateway IP from the menu and enter the router IP
address. Press APPLY.
Setting the Administrator Password
Management access to the switch is restricted based on the
administrator password.
for parameters governing the SNMP agent. You should therefore
assign a password to the default administrator as soon as possible,
and store it in a safe place.
Setting Trap Destinations
If you wish to record SNMP traps, or events, generated by the
switch, you must configure a destination for the IP Trap Managers.
A trap destination is the IP address of the computer system on
which the web-based manager is being run.
1. Starting at the Main Menu of the User Interface, select
Management / IP Trap Managers.
2. Select an entry for an IP Trap Manager from the menu,
then enter the IP address and community name.
Web-Based Network Management
Administrators have read/write access
247