D-Link DES-3326 User Manual page 186

DES-3326 Layer 3 Fast Ethernet Switch User's Guide
Figure 6-40. Setup IEEE 802.1Q Multicast Forwarding
The Action:< > field can be toggled between Add/Modify and
Delete using the space bar. To add a new entry to the multicast
forwarding table, select Add/Modify and enter the VID of the
VLAN that will be receiving the multicast packets. Enter the MAC
address of the multicast source, and then enter the member ports.
Each port can be an Egress, Forbidden, or a Non-member of the
multicast group, on a per-VLAN basis.
To set a port's multicast group membership status, highlight the
first field of (E/F/-): [ ][ ][ ].
membership can be set individually by highlighting the port's entry
using the arrow keys, and then toggling between E, F, or – using
the space bar.
E - (Egress Member) specifies the port as being a static
member of the multicast group. Egress Member Ports are
ports that will be transmitting traffic for the multicast
group.
172
Configuring the Switch Using the Console Interface
Each port's multicast group