DES-3326 Layer 3 Fast Ethernet Switch User's Guide
A router port will be dynamically configured when IGMP query
packets, RIPv2 multicast, DVMRP multicast, PIM-DM multicast
packets are detected flowing into a port.
The Action:<
> field can be toggled between Add/Modify and
Delete using the space bar. To add a port to the static router port
table, select Add/Modify and enter the VID of the VLAN the
router port will belong to.
Highlight the first field of Router Port (M/-):[
][
][
].
Each port can be set individually as a router port by highlighting
the port's entry using the arrow keys, and then toggling between M
and – using the space bar.
Highlight APPLY and press enter to make the changes current.
Use Save Changes from the Main Menu to enter the changes
into NV-RAM.
To delete an entry, select Delete and enter the VID of the VLAN
for which the router port table entry is to be deleted. Highlight
APPLY and press enter. The entry for the VLAN will be deleted.
Use Save Changes from the Main Menu to enter the changes
into NV-RAM.
Port Mirroring
To configure a port for port mirroring:
Highlight Mirroring from the Main Menu and press enter.
186
Configuring the Switch Using the Console Interface