D-Link DES-3326 User Manual page 335

DES-3326 Layer 3 Fast Ethernet Switch User's Guide
Static Bootp Relay Setup
The second task is to tell the BOOTP/DCHP relay agent where the
servers are located in terms of IP addresses and subnet names (IP
interface names).
The following figure and table describe how to set up the static
Bootp Relay function on the switch.
Figure 7-55. BOOTP Relay Setup Screen
Parameter Description
Subnet Name The subnet name (IP interface name) of the
network that the BOOTP server is located
on.
Web-Based Network Management
be dropped. The range is
between 1 and 65,535
seconds. The default value
is 4 seconds.
321