D-Link DES-3326 User Manual page 192

DES-3326 Layer 3 Fast Ethernet Switch User's Guide
Figure 6-45. Multicast Interface Configuration
Enter the name of the IP interface that is to be configured for
multicasting in the Interface Name:[ ] field. This must be a
previously configured IP interface. See Setting up IP Interfaces,
Chapter 6 of this manual for more information.
The IGMP: < > field can be toggled between Enabled and
Disabled using the space bar. This will enable or disable IGMP
for the IP interface entered above.
The Protocol: < > field can be toggled between Protocol
Independent Multicasting – Dense Mode (PIMDM), Distance
Vector Multicasting Routing Protocol (DVMRP), and INACT
(inactive). INACT is not a multicast routing protocol. It is used to
make a given interface inactive for IP routing.
To configure the IGMP interface:
Highlight IGMP Interface Configuration from the Setup IP
Multicast menu and press enter.
178
Configuring the Switch Using the Console Interface