D-Link DES-3326 User Manual page 290

DES-3326 Layer 3 Fast Ethernet Switch User's Guide
Tx Mode Displays whether transmitted RIP packets
will be structured as V1 only, V1
Compatible, V2 Only, or Disabled. This
entry specifies which version of the RIP
protocol will be used to transmit RIP
packets. Disabled prevents the
transmission of RIP packets.
Rx Mode Displays whether received RIP packets will
be interpreted as RIP version V1 only, V2
Only, V1 and V2, or Disabled. This entry
specifies which version of the RIP protocol
will be used to receive RIP packets. The
Disabled entry prevents the reception of
RIP packets.
Auth. Displays whether RIP is configured to use
an authorization string.
More A link to the Setup RIP - Edit
Edit RIP Setup
The following menu is used to edit the switch's RIP setup.
Figure 7-22. Setup RIP – Edit Screen
Parameter Description
276
Web-Based Network Management