D-Link DES-3326 User Manual page 265

DES-3326 Layer 3 Fast Ethernet Switch User's Guide
1 Presents a graphical near real-time image of the
front panel of the switch. This area displays the
switch's ports and expansion modules, showing
port activity, duplex mode, or flow control,
depending on the specified mode.
Various areas of the graphic can be selected for
performing management functions, including the
ports, expansion modules, management module, or
the case.
2 Allows the selection of commands.
3 Presents switch information based on your
selection and the entry of configuration data.
Function Description
System Provides basic system description, including
contact information.
Switch Shows hardware/firmware version numbers,
power status, and expansion modules in use.
IP Includes boot state, IP address, and Telnet
session count.
SNMP Configures communities and trap managers;
and activates traps.
Security Sets password for system access.
Upgrade Downloads new version of firmware to update
your system.
Configure Allows you to save/restore the switch
configuration to a file on a server.
Address Table Provides full listing of unicast address, sorted
by address or VLAN.
STP Enables Spanning Tree Protocol; also sets
parameters for switch priority, hello time,
maximum message age, and forward delay;
as well as port priority and path cost.
Priority Configures default port priorities and queue
assignments.
Web-Based Network Management
251