D-Link DES-3326 User Manual page 184

DES-3326 Layer 3 Fast Ethernet Switch User's Guide
To edit a VLAN's IGMP Snooping Settings:
Enter the VID of the VLAN for which the IGMP settings are to be
edited.
The State:< > field can be toggled between Enabled and
Disabled using the space bar.
snooping for the selected VLAN.
The Age-out Timer:[ ] field allows the entry of an IGMP age-out
timer value between 10 and 9,999 seconds. This timer determines
how long a snooped multicast member's IP and MAC address
remain in the IGMP address table.
seconds.
To globally enable or disable IGMP for the switch:
Highlight Switch Settings from the Main Menu and press
enter.
Figure 6-39. Switch Settings Menu
Highlight Layer 2 Switch Settings and press enter.
170
Configuring the Switch Using the Console Interface
This enables or disables IGMP
The default value is 260