Saving Changes - D-Link DES-3326 User Manual

DES-3326 Layer 3 Fast Ethernet Switch User's Guide
Switch Configuration
Management
Configuration
Network Monitoring
Community Strings and Trap Stations
Update Firmware and Configuration
Files
System Utilities
Factory Reset
Reboot Switch
User Accounts Management
Add/Update/Delete User Accounts
View User Accounts
Table 7-1. Root, User+, and User Privileges
After establishing a User Account with Root-level privileges,
highlight Save Changes and press Enter (see below). The switch
will save any changes to its non-volatile ram and reboot. You can
logon again and are now ready to continue configuring the Switch.

Saving Changes

The DES-3326 has two levels of memory; normal RAM and non-
volatile or NV-RAM. Configuration changes are made effective by
highlighting Apply and pressing Enter. When this is done, the
settings will be immediately applied to the switching software in
RAM, and will immediately take effect.
Some settings, though, require you to restart the switch before
they will take effect. Restarting the switch erases all settings in
Web-Based Network Management
Privilege
Root User+ User
Yes Read Only Read Only
Yes Read Only Read Only
Yes Read Only Read Only
Yes No No
Yes Ping Only Ping Only
Yes No No
Yes Yes No
Yes No No
Yes Yes Yes
243