D-Link DES-3326 User Manual page 281

DES-3326 Layer 3 Fast Ethernet Switch User's Guide
Switch
The switch can operate in one of two modes:
3. Layer 2 Only with IEEE 802.1Q VLAN support:
the switching process is based upon the source and
destination MAC addresses only. 802.1Q VLANs are
supported and the switch is considered as a VLAN-
tag aware device.
4. IP Routing with IEEE 802.1Q VLAN support:
the switching process is based upon the IP source
and destination addresses, if present.
addresses are not present, the switching process is
based upon the MAC addresses (as in Layer 2 above).
802.1Q VLANs are supported and the switch is
considered as a VLAN-tag aware device.
The switch must be rebooted when changing the operation mode
before the new operation mode can take effect.
Switch Operation Mode
The field Restart Mode can be set using the drop down menu to
one of the two switch operation modes: Layer 2 Only, Support
IEEE 802.1Q VLANs and IP Routing, Support IEEE 802.1Q
VLANs.
To make a change in the operation mode of the switch effective,
click the APPLY button. The switch must be restarted to change
the operating mode.
Web-Based Network Management
If the IP
267