D-Link DES-3326 User Manual page 280

Des-3326 24-port fast ethernet plus 2-port gigabit module layer 3 switch
Hide thumbs Also See for DES-3326:
Table of Contents

Advertisement

DES-3326 Layer 3 Fast Ethernet Switch User's Guide
Auto-Logout
Specifies length of time a management
session can be idle. When this time has
expired, the switch's management agent
will disconnect the user. The default value
is 10 minutes.
Slip Settings
Parameter
Description
Baud Rate
Specifies the rate data will be exchanged
over the serial link. The default value is
9600 baud.
Interface Name
The name of the IP interface, previously
defined on the switch, that will
communicate with the remote management
station.
Local IP Address
The IP address that corresponds to the IP
interface name above.
Remote IP Address The IP address of the remote management
station that will communicate with the
switch using SLIP.
MTU
Maximum Transfer Unit, specifies the
maximum number of bytes (octets) that can
be transferred in a single packet. The
options are 1006 and 1500.
266
Web-Based Network Management

Advertisement

Table of Contents
loading

Table of Contents