Software Update Instructions; Copy The Update File To A Usb Drive From A Pc; Update The Receiver By Usb Interface - Strong SRT 5428S User Manual

8

SOFTWARE UPDATE INSTRUCTIONS

8.1 COPY THE UPDATE FILE TO A USB DRIVE FROM A PC

1. Please visit the STRONG Australia website at www.strong.com.au or contact our customer service
department on 1800 820 030 to obtain the latest software for updating your receiver.
2. Plug the USB drive to the PC and backup the entire data of the USB drive. Right click the USB
drive and select Format item. Format the USB drive as FAT32 file system.
3. Copy the update file that is named, for example "SRT5428S.AP" to the root of the USB drive.
Then remove the USB drive from the PC.
Warning: The USB interface is for software upgrade of the Receiver is only possible by using
a USB Flash Drive with FAT32 file system format. The USB interface does not support USB
Flash drives with U3 PRO System. Never connect a portable hard disk to the USB interface of
the Receiver for software updates.

8.2 UPDATE THE RECEIVER BY USB INTERFACE

1. Plug the USB drive that with the update file to the USB interface of the receiver.
2. Go to main menu and press "666666" to start upgrade process. When the upgrade progress has
reached 100% and the update has finished, remove the USB flash drive power off and power on
the receiver again.
3. Please set the receiver to the factory default setting via the main menu once it has rebooted
NOTE: Please do not remove the USB drive from the receiver and power off the receiver during
upgrading process. Otherwise the receiver may not work properly.
17