Related Manuals for Strong SRT 5203
Summary of Contents for Strong SRT 5203
-
Page 1: User Manual
Digital Terrestrial Receiver SRT 5203 Digital Terrestrial Twin Tuner Receiver SRT 5222 User manual SRT 5203, SRT 5222 SRT 5222... -
Page 4: Table Of Contents
6.3 Accessing the favourite channels A.1 TROUBLESHOOTING A.2 SPECIFICATIONS STRONG declares that this item complies with the basic requirements and other relevant regulations of directives CE 2004/108/EEC and 73/23EEC, RoHS 2002/95EEC Subject to alterations. In consequence of continuous research and development technical specifications, design and appearance of products may change. -
Page 5: Instruction
Attachments — For your safety, and to avoid damaging the product, use only accessories recommended by STRONG. Water and Moisture — Never use this product around water (near a bathtub, kitchen sink, laundry tub, wet basement. swimming pool or in the rain) Location —... - Page 6 PART 1 • English installation such as a book case or rack, unless proper ventilation is provided. Ensure that free airflow is maintained around the receiver. Protecting the Power Cord — The power supply cord should be placed so it will not be walked on.
-
Page 7: Storage
RCU and sensor or it is exposed to direct sunlight or a strong artificial light (fluorescent or strobe light) the sensor may not be able to receive the remote signal. In this case, change the direction of the light or reposition the unit. -
Page 8: Your Receiver
PART 1 • English 2.0 YOUR RECEIVER 2.1 PIN-CODE DEFAULT: 0000 2.2 Front Panel Fig. 1 2.3 Rear Panel Fig. 2 1. ANT IN To connect an antenna for reception of broadcasting signal. 2. TO TV To connect a TV set or to connect an extra receiver. 3. -
Page 9: Connection
To receive the broadcast signal, the terrestrial antenna cable should be connected to the ANT IN connector at the back of the receiver. SRT 5203 Fig. 4; SRT 5222 Fig. 5 3.2 Connecting to TV, DVD/Video Recorder and Hi-Fi SRT 5203 Fig. 4; SRT 5222 Fig. 5 3.3 Connecting a USB storage device... - Page 10 PART 1 • English 5.1.1 TV Channel list 1. In Channel submenu select TV Channel List with the pq buttons and press OK to enter. 2. Use the tu buttons to change channel group (assumed you have already set up Favourite groups). 3.
-
Page 11: Installation
PART 1 • English 5.1.1.4 Move Press the [4] button to activate the Move function. The selected channel will be marked symbol, use the pq buttons to move the selected channel to the desired in a position. With tu select Yes in the confirmation window and press OK to save. 5.1.2 Radio Channel list Basically, the operation of Radio Channel List is the same as in TV Channel List only difference is that in Radio Channel List there is no video information, so it will always... -
Page 12: Setup
PART 1 • English 4. When By Channel is selected use the cursor buttons to select Scan Band and Channel No. When By Frequency is selected use the cursor buttons to select Frequency and Bandwidth. Select Network Search to ON or OFF, highlight Search and press OK to start scan. -
Page 13: Osd Setting
PART 1 • English GMT Usage: This menu is used for usage of GMT. The options are: Off / User Define / By Region GMT Offset: This menu is valid only when selected “User Define” in GMT Usage menu. The GMT offset range is “-11:30 ~ +12:00”, increasing by half hours progressively. -
Page 14: Tools
2. Press EXIT button to exit. 5.4.1 Receiver Information This menu displays some Receiver information like Hardware, Software, Build Date, Signature and Remote Control and our Web site www.strong.tv. 1. In Tools menu, select “Receiver Information” and press OK button to open receiver information window. -
Page 15: Media
Note: This receiver has foreseen an over the air update function, which might not be available at your local broadcast conditions. For further details visit our website www.strong.tv or contact your local Serviceline. 5.5 Media+ The “Media+” menu consists of following submenus: Media Player, Record Manager, Removable Disk Information, Record Settings, Safely remove storage device and Disk Format Select “Media+”... - Page 16 PART 1 • English 2. Press pq to select a desired recording and press OK or BLUE (u) button to playback the desired files. 3. Press EXIT to exit. During the playback, it is possible to perform the following actions: YELLOW (2): to pause the playback.
- Page 17 PS: Program stream for playback by PC or another device. With SRT 5203 you can record a channel while watching another within the same frequency. With SRT 5222 you can record 2 channels from different frequencies to USB device and you can watch another programme within the same frequency of the last recording.
-
Page 18: Operation
PART 1 • English 5.5.6 Disk Format 1. In “Media+” menu, select Disk Format and press OK to enter this menu. You will see actual used Device and Partition displayed, furthermore the available Capability in GB is shown. 2. Press pq to select File System and use tu to change between FAT/ NTFS settings. -
Page 19: Troubleshooting
Forgotten menu lock code Contact local Service Hotline or send email to our Support via www.strong.tv After moving the receiver The aerial feed former new point may Try a direct feed from the antenna to another room you are no... - Page 20 VCR SCART: Composite Video, Audio L/R SRT 5203: 0.46 kg; S/PDIF: coaxial output SRT 5222: 0.57 kg USB 2.0 port, max. 5 V / 500 mA supported * STRONG cannot guarantee the playback of external video files, which have not been recorded by this device...
- Page 21 PART 1 • English...