Eaton Powerware 9140 User Manual page 61

Table 2. UPS Input Bypass Wiring Specifications
UPS Terminal Terminal
Block Position
Input Bypass
2
* Use 13.3 mm (6 AWG) 90_C copper wire minimum. For ease of installation, use appropriately sized ferrules on the end
of each wire.
Eaton 9140 UPS (7.5–10 kVA) User's Guide
UPS Wire Function
1 L1-JP
2 Line In
3 Neutral In
4 Input Bypass Ground
11. Connect the output and ground wires to the output terminal block
according to Figure 34 and Table 3.
Terminal Wire
Size Rating*
2
13.3 mm (6 AWG)
Line/L1
Out
Figure 34. UPS Output Terminal Block
S 164201622 Rev 3 www.eaton.com/powerquality
INSTALLATION
Tightening
Torque
1.8 Nm (16 lb in)
Neutral or L2 Out
Output
Ground
55