3.
Using two M5 machine screws and an adapter plate, attach the rail
to the front of the rack (see Figure 2 and Figure 3).
Do not tighten the screws.
4.
Adjust the rail size on the rail assembly for the depth of your rack
(see Figure 4).
Rear
Figure 4. Adjusting the Rail Depth (Right Rail Assembly Shown)
Eaton 9140 UPS (7.5–10 kVA) User's Guide
Figure 3. Securing the Front Rail
S
164201622 Rev 3 www.eaton.com/powerquality
INSTALLATION
Front M5 Screws
Position 6
Position 5
Position 4
Position 1
Adapter Plate
Front
25