Eaton Powerware 9140 User Manual page 34

INSTALLATION
28
Eaton 9140 UPS (7.5–10 kVA) User's Guide
14. Secure the front of the cabinet to the rack as shown in Figure 8.
Figure 8. Securing the Front of the EBM
NOTE To install the optional seismic mounting brackets, the length of the rails must be
between 28.5 and 32 inches.
15. If installing the optional seismic mounting brackets, align the two
EBM seismic mounting brackets with the screw holes on the sides
of the EBM above the rear mounting brackets. Loosely secure the
brackets with four supplied wing bolts. See Figure 9.
Do not tighten the wing bolts.
Figure 9. Installing the Optional EBM Seismic Mounting Brackets
S 164201622 Rev 3 www.eaton.com/powerquality
Position 8 (M6 screw
and clip/cage nut)
Position 3 (M5 screw)
Position 2 (M5 screw)