Eaton Powerware 9140 User Manual page 40

INSTALLATION
34
Eaton 9140 UPS (7.5–10 kVA) User's Guide
2. If access to the sides of your rack is difficult, adjust the length of
the rails (see Figure 16) and loosely install the fasteners (see
Figure 18) before continuing to Step 3.
3. Using two M5 machine screws and an adapter plate, attach the rail
to the front of the rack (see Figure 14 and Figure 15).
Do not tighten the screws.
S 164201622 Rev 3 www.eaton.com/powerquality
Figure 15. Securing the Front Rail
Front M5 Screws
Position 6
Position 5
Position 4
Position 1
Adapter Plate