Eaton Powerware 9140 User Manual page 41

4. Adjust the rail size on the rail assembly for the depth of your rack
(see Figure 16).
Rear
Figure 16. Adjusting the Rail Depth (Right Rail Assembly Shown)
5. Secure the rail to the rear of the rack with four M5 machine screws
and an adapter plate (see Figure 17).
Tighten all screws at the front and rear of the rail.
Bottom of Rack or
Top of Other Cabinet
Figure 17. Securing the Rear Rail (Right Rail Assembly Shown)
Eaton 9140 UPS (7.5–10 kVA) User's Guide
Adapter Plate
S 164201622 Rev 3 www.eaton.com/powerquality
INSTALLATION
Front
Position 6
Position 5
Position 4
Position 3
Position 2
Position 1
35