Typematic Rate Setting; Apic Mode; Mps Version Control For Os; Advanced Chipset Features - Albatron P4M800 Pro User Manual

Typematic Rate Setting

When "Enabled", the "typematic rate" and "typematic delay" can be configured. Typematic Rate
determines the keystroke repeat rate used by the keyboard controller.
Options: Disabled (default)、Enabled
Typematic Rate (Chars/Sec)
The rate at which character repeats when you hold down a key.
Options: 6 (default)、8、10、12、15、20、24、30
Typematic Delay (Msec)
The delay before keystrokes begins to repeat. Options: 250 (default)、500、750、1000

APIC Mode

By enabling this option, "MPS version control for OS" can be configured.
Options: Disabled、Enabled (default)

MPS Version Control For OS

The 1.1 version is the older version that supports 8 more IRQs in the Windows NT environment. Choose
the new 1.4 version for Windows 2000 and Windows XP. Options: 1.4 (default)、1.1
OS Select For DRAM > 64MB
Select "OS2" only if you are running the OS/2 operating system with greater than 64MB of RAM.
Options: Non-OS2 (default)、OS2
HDD S.M.A.R.T. Capability
Self Monitoring Analysis and Reporting Technology is a technology that enables a PC to attempt to
predict the possible failure of storage drives. Options: Disabled (default)、Enabled
Small Logo (EPA) Show
This item allows you to show or hide the small LOGO EPA. Options: Disabled、Enabled (default)

Advanced Chipset Features

DRAM Clock/ Drive Control
Press <Enter> to enter next page for DRAM Clock/ Drive Control settings.

DRAM Clock

This item determines DRAM clock using SPD or other configurations. Make sure your memory module
has SPD (Serial Presence Data), if you want to select the "By SPD" option.
Options: By SPD (default)、200MHz、266MHz

DRAM Timing

This item determines DRAM timing using auto or manual configuration. Options: Manual、Auto (default)
23