Cpu L2 Cache Ecc Checking; Quick Power On Self Test; Swap Floppy Drive; Typematic Rate Setting - Albatron PM266A PRO User Manual

Options: Disabled (default)、Enabled
CPU L1 & L2 Cache
M ake CPU internal cache active or inactive. System performance may degrade if you disable this
item. Options: Enabled (default)、Disable
Hyper-Threading Technology
This option allows you to enable/disable Hyper-Threading functionality. This item only applies when
the CPU installed supports Hyper-Threading Technology. Options: Enabled、Disabled (default)

CPU L2 Cache ECC Checking

Make CPU L2 cache ECC function active or inactive. Options: Disabled、Enabled (default)

Quick Power On Self Test

Allow the system to skip certain tests while booting. This will speed up the boot process.
Options: Enabled (default)、Disabled.

Swap Floppy Drive

If the system has two floppy drives, choose "Enabled" to assign physical drive B to log
and vice-versa. Options: Disabled (default)、Enabled.
B oot Up NumLock Status
Selects the power on state for NumL
Options: On (default)
Off

Typematic Rate Setting

When "Enabled", the "typematic rate" and "typematic delay" can be configured. Typematic Rate
determines the keystroke repeat rate used by the keyboard controller..
Options: Disabled (default)、Enabled
Typematic Rate (Chars/Sec)
The r ate at which a character repeats when you hold down a key.
Options: 6 (default)、8、10、12、15、20、24、30
Typematic Delay (Msec)
The delay before keystrokes begin to repeat. Options: 250 (default)、500、750、1000
ock.
Numpad keys are number keys.
Numpad keys are arrow keys.
25
PM266A PRO/ PM266A
ical drive A