When set to "On", you need a LAN add-on card which supports the power on function. It should also
support the wake-up on LAN jumper. Options: OFF (default)、ON
PCI PME Wake Up
When you select "Enabled", a PME signal from any PCI card will awaken the system from suspend
mode. Options: Disabled (default)、Enabled
Ring Wake Up
This option allows you to awaken the system upon receiving an incoming call to modem device.
Options: Disabled (default)、Enabled.
RTC Wake Up
When "Enabled", you can set the date and time at which the RTC (real-time clock) alarm awakens the
system from Suspend mode. Options: Enabled、Disabled (default).
Date (of Month) Alarm
You can choose which date of the month the system will boot up. This field is only configurable when
"RTC Wake Up" is set to "Enabled".
Time (hh: mm: ss) Alarm
You can choose the hour, minute and second the system will boot up. This field is only configurable
when "RTC Wake Up" is set to "Enabled".
IRQs Activity Monitoring
Press Enter to access a sub menu used to configure the different wake up events (i.e. wake on LPT &
COMM activity).
Primary INTR
IRQ3 ( COM2 )
IRQ4 ( COM1 )
IRQ5 ( LPT2 )
IRQ6 ( Floppy Disk )
IRQ7 ( LPT1 )
IRQ8 ( RTC Alarm )
IRQ9 (RQ2 Redir)
IRQ10 (Reserved)
IRQ11 (Reserved)
IRQ12 (PS/2 Mouse)
IRQ13 (Coprocessor)
IRQ14 (Hard Disk)
IRQ15 (Reserved)
On
Enabled
Enabled
Enabled
Enabled
Enabled
Disabled
Disabled
Disabled
Disabled
Enabled
Enabled
Enabled
Disabled
32