Thermal Management; Virus Warning; Quick Power On Self Test; Boot Up Numlock Status - Albatron PX915P4C Series User Manual

PX915P4C/ PX915G4C Series
Options: 4 Min、8 Min、16 Min (default)、32 Min

Thermal Management

This item will monitor the CPU thermal to prevent the CPU damage with high temperature.
Limit CPUID MaxVal
When the limit CPUID MaxVal is set to 3, the item should be set to "Disabled" for Windows XP. Options:
Enabled、Disabled (default)

Virus Warning

This item allows you to choose the Virus Warning feature for IDE Hard Disk boot sector protection. If
this function is enabled and someone attempts to write data into thia area, BIOS will display a warning
message on the screen and sound an audio alarm (beep).
Options: Disabled (default)、Enabled
CPU L1 & L2 Cache
Make CPU internal cache active or inactive. System performance may degrade if you disable this item.
Options: Enabled (default)、Disable.
Hyper-Threading Technology
When you install a CPU include Hyper-Threading Technolong. And this item will allow you to enable or
disabled the Hyper-Threading technology.
Options: Disabled、Enabled (default)

Quick Power On Self Test

Allows the system to skip certain tests while booting. This will speed up the boot process.
Options: Enabled (default)、Disabled.

Boot Up NumLock Status

Selects the power on state for NumLock.
Options: On (default) Numpad keys are number keys.
Off Numpad keys are arrow keys.

Typematic Rate Setting

When "Enabled", the "typematic rate" and "typematic delay" can be configured. Typematic Rate
determines the keystroke repeat rate used by the keyboard controller..
Options: Disabled (default)、Enabled
Typematic Rate (Chars/Sec)
The rate at which a character repeats when you hold down a key.
26