Quick Power On Self Test; Boot Up Numlock Status; Typematic Rate Setting; Apic Mode - Albatron PX848 Like Series User Manual

Hyper-Threading Technology
This option allows you to enable/disable Hyper-Threading functionality. This item only applies when
the CPU installed supports Hyper-Threading Technology. Options: Disabled (default)、Enabled

Quick Power On Self Test

Allow the system to skip certain tests while booting. This will speed up the boot process.
Options: Enabled (default)、Disabled.

Boot Up NumLock Status

Selects the power on state for NumLock.
Options: On (default)
Off

Typematic Rate Setting

When "Enabled", the "typematic rate" and "typematic delay" can be configured. Typematic Rate
determines the keystroke repeat rate used by the keyboard controller..
Options: Disabled (default)、Enabled
Typematic Rate (Chars/Sec)
The rate at which a character repeats when you hold down a key.
Options: 6 (default)、8、10、12、15、20、24、30
Typematic Delay (Msec)
The delay before keystrokes begin to repeat. Options: 250 (default)、500、750、1000

APIC Mode

By enabling this option, "MPS version control for OS" can be configured.
Options: Disabled、Enabled (default)

MPS Version Control For OS

The 1.1 version is the older version that supports 8 more IRQs in the Windows NT environment.
Choose the new 1.4 version for Windows 2000 and Windows XP. Options: 1.4 (default)、1.1
OS Select For DRAM > 64MB
Select "OS2" only if you are running the OS/2 operating system with greater than 64MB of RAM.
Options: Non-OS2 (default)、OS2
Numpad keys are number keys.
Numpad keys are arrow keys.
24
PX848 Like Series