Run Vga Bios If S3 Resume - Albatron P4M800 Pro User Manual

Run VGA Bios if S3 Resume

Select whether you want to run VGA BIOS when the system wakes up from the S3 suspend function.
This field is not configurable if "ACPI Suspend Type" is set to "S1 (POS)".
Options: Auto (default)、Yes、No
PWRON After PWR-Fail
This field will determine whether your system will boot after restoring power after a power failure. If you
select "On", the system will boot whether or not the system was on before power failure. If you select
"Former-Sts", the system will be restored to the status before the power failure.
Options: Off (default)、On、Former-Sts
Wake Up Control
If you highlight the "Wake Up Control" label and then press the enter key, it will display a submenu with
the following options:
PS2 KB Wakeup Select
Use this option to configure the PS2 keyboard Wake Up feature.
"Password" Use this selection to force the user to enter a password after the system awakens
from PS2 keyboard activity.
"Hot Key" Use PS2KB key to awake the system. See "PS2KB Wake Up from S3-S5" to
configure the hotkey.
PS2 KB Wakeup From S3/ S4/ S5
This option is used when "PS2KB Wake Up Select" is configured as "HOT KEY".
Options: Disabled (default) 、Ctrl+F1 (to F12)、Power、Wake、Any Key
USB Wake Up
This item allows you to select USB devices to awaken the system from suspend mode.
Options: Enabled、Disabled (default)
VGA
When set to "On", any event occurring at a VGA Port will awaken a system which had been previously
powered down. Options: OFF (default)、On
LPT & COM
When this option is set to On, any event occurring at a COM(serial)/LPT (printer) port will awaken a
system which has been suspended. Options: LPT/COM (default)、COM、LPT、NONE
HDD & FDD
When set to "On", any event occurring on a hard drive activity or a floppy drive activity will awaken the
system which had been previously suspended. Options: ON (default)、OFF
PCI Master
31