Headers & Jumpers - Albatron P4M800 Pro User Manual

3-pin Power LED Header (Green): PWRLED
The mainboard also provides a 3-pin power LED header. If there is a 3-pin power LED cord on your case
front panel, you can attach it to this 3-pin header instead of attach to the 2-pin one on the SW/LED
header.
3-pin PWR_LED
Speaker Header (Purple): SPEAKER
A speaker cable on your case front panel can be attached to this header. When you reboot the computer,
this speaker will issue a short audible (beep). If there are problems during the Power On Self-Test, the
system will issue an irregular pattern of audible beeps through this speaker.
SPEAKER
Headers & Jumpers
Front USB Headers: USB2/3
This mainboard provides four onboard USB 1.1/2.0 ports (back panel) that attach to USB devices.
There are two additional USB headers that can be connected by cables to four USB ports on the front
panel of your PC case giving the possibility of 8 USB ports.
USB2/3
Attention
If you are using a USB 2.0 device with Windows 2000/XP, you will need to
install the USB 2.0 driver from the Microsoft
pack 1 (or later) for Windows
Windows® 2000,you will not have to install the driver.
Pin Assignment
PWR_LED (+)
1
PWR_LED (-)
3
Pin Assignment
1 PC_BEEP
3 Ground
Pin Assignment
1 +5V (fused)
3 USB-
5 USB+
7 Ground
9 N/A
® XP, and using Service pack4 (or later) for
12
Pin Assignment
2 N/A
Pin Assignment
2 N/A
4 +5V
Pin Assignment
2 +5V (fused)
4 USB-
6 USB+
8 Ground
10 N/A
®
website. If you are using Service