Advanced BIOS Features
Virus Warning
This item allows you to choose the VIRUS warning feature for IDE Hard Disk boot sector protection.
If this function is enabled and someone attempts to write data into this area, BIOS will display a
warning message on the screen and sound an audio alarm (beep).
Options: Disabled (default)、Enabled
CPU L1 & L2 Cache
Make CPU internal cache active or inactive. System performance may degrade if you disable this
item. Options: Enabled (default)、Disable
Hyper-Threading Technology
This option allows you to enable/disable Hyper-Threading functionality. This item only applies when
the CPU installed supports Hyper-Threading Technology. Options: Enabled、Disabled (default)
CPU L2 Cache ECC Checking
Make CPU L2 cache ECC function active or inactive. Options: Disabled、Enabled (default)
Quick Power On Self Test
Allow the system to skip certain tests while booting. This will speed up the boot process.
Options: Enabled (default)、Disabled.
Swap Floppy Drive
If the system has two floppy drives, choose "Enabled" to assign physical drive B to logical drive A
and vice-versa. Options: Disabled (default)、Enabled.
Boot Up NumLock Status
Selects the power on state for NumLock.
Options: On (default)
Off
Typematic Rate Setting
When "Enabled", the "typematic rate" and "typematic delay" can be configured. Typematic Rate
determines the keystroke repeat rate used by the keyboard controller..
Options: Disabled (default)、Enabled
Numpad keys are number keys.
Numpad keys are arrow keys.
25
PM266A PRO/ PM266A