Agp Fast Write; Agp Master 1 Ws Write; Agp Master 1 Ws Read; Vga Share Memory Size - Albatron P4M800 Pro User Manual

AGP Fast Write

The AGP Fast Write technology allows the CPU to write directly to the graphics card bypassing the
system AGP 4X speed. Choose "Enable" only when you used with AGP card support.
Options: Disabled (default)、Enabled

AGP Master 1 WS Write

When enabled, writes to the AGP (Accelerated Graphics Port) are executed with one wait state.
Options: Disabled、Enabled (default)

AGP Master 1 WS Read

When enabled, reads from AGP (Accelerated Graphics Port) are executed with one wait state.
Options: Disabled、Enabled (default)
AGP 3.0 Calibration Cycle
This item will appear when you install the 8X VGA card. Options: Enabled、Disabled (default)

VGA Share Memory Size

This item determines VGA share memory size. Options: Disabled、16M、32M、64M (default)

Direct Frame Buffer

This item allows charging extra VGA share memory from Memory for great performance on the go.
Options: Enabled、Disabled (default)
CPU & PCI Bus Control
Press <Enter> to enter the next page for CPU & PCI Bus Control

PCI Master 0 WS Write

When enabled, writes to the PCI bus are executed with zero-wait states.
Options: Enabled (default)、Disabled

PCI Delay Transaction

The chipset has an embedded 32-bit post write buffer to support delay transactions cycles. Select
Enabled to comply with PCI specifications. Options: Enabled (default)、Disabled

CPU Clock Ratio

This item will only display if the CPU has not been set to a locked state by the CPU manufactory. If your
CPU is locked, you will not be able to see the "CPU Clock Ratio" item. The default depends on your
CPU.

Memory Hole

25