Advanced Bios Features; Virus Warning; Quick Power On Self Test; Swap Floppy Drive - Albatron PM 845G Series User Manual

Advanced BIOS Features

Virus Warning

This item allows you to choose the VIRUS warning feature for IDE Hard Disk boot
sector protection. If this function is enabled and someone attempts to write data into this
area, BIOS will display a warning message on the screen and sound an audio alarm
(beep). Options:
Disabled (default) Virus protection is disabled.
Enabled Virus protection is activated.
CPU L1 & L2 Cache
Make CPU internal cache active or inactive. The system will slow down if you disable
this item. Options: Enabled (default), Disable.

Quick Power On Self Test

Allow the system to skip certain tests while booting. This will decrease the time needed
to boot the system. Options: Enabled (default), Disabled.

Swap Floppy Drive

If the system has two floppy drives, choose "Enabled" to assign physical drive B to
logical drive A and vice-versa. Options: Disabled (default), Enabled.

Boot Up NumLock Status

Selects power on state for NumLock. Options: On (default), Off

Typematic Rate Setting

When "Enabled", the "typematic rate" and "typematic delay" can be configured.
Typematic Rate determines the keystroke repeat rate used by the keyboard controller..
Options: Disabled (default), Enabled
Typematic Rate (Chars/Sec)
The rate at which character repeats when you hold down a key.
Options: 6 (default), 8,10,12,15,20,24,30.
Typematic Delay (Msec)
The delay before keystrokes begin to repeat. Options: 250 (default), 500,750,1000.

APIC Mode

By enabling this option, MPS version control for OS can be configured.
Options: Disabled, Enabled (default).
PM845G Series Mainboard
28