Table of Contents
Advertisement
OM20 Universal Outdoor Modem
D.4
WEB Users Setup and Configurations Controls Options
We use authentication and authorization together with a user database and a Security Realm to
design a secure site. This makes use of users and groups, where users are generally people that
may access the system, and groups represent the position that users can hold.
The web user database consists of three users, with initial default names of guest, oper, and
admin. Access rights and authentication make it possible to restrict/control access to a specified
set of web users. Any of the three user names can be modified. The user name can have up to
14 characters supporting alpha and numeric characters. Alpha characters can be entered using
the up and down arrow keys. Numeric characters can be selected by using the number keys.
Some of those selections are also available to a properly authenticated user with ADMIN
privileges. Refer to Figure 6.
1. From the modem introduction page, click the ADMINISTRATION tab.
2. If not already logged on, enter your username and password on the logon popup, and
then press the Enter key.
3. Select USER1, USER2, or USER3 from the drop down Edit User menu. The
corresponding username and access rights will get updated on the screen.
4. Select a new username if desired, and password. Confirm the new password then click
on the Save button.
5. Click on the Cancel button at any time to abort and reload the current user settings.
TM116 – Rev. 1.2
Web User
Authentication
Password
guest
guest
oper
oper
admin
admin
Access
Group
GUEST
OPER
ADMIN
Appendix D
D-
6
Advertisement
Table of Contents
