Table of Contents
Advertisement
OM20 Universal Outdoor Modem
6.2.4 Monitor and Control Menu
Under this menu, all modem functions that are monitored and/or controlled are accessible. To
access the M&C sub menu options drag the cursor across the gel-tabs. Note that as the cursor
passes over a tab it is highlighted and a menu drops below the tab. Stop on the desired tab
move the cursor down and then across to the desired function. Select the desired sub menu
function and the data entry menu will appear in the data entry section allowing for adjustments to
the parameters displayed.
6.2.4.1
Transmit Menu
The Transmit menu contains sub menus; General/IF, Data, Reed Solomon, ODU-BUC and
AUPC.
General / IF Menu
Network Spec:
TM116 – Rev. 1.2
Figure 6-9. General | IF Menu
{CLOSED NET, IDR, IBS, DROP & INSERT, DVB SAT}
Used with IDR, or IBS Interface Only.
The Network Spec Command sets a number of
parameters within the modem to meet a set
specification. The purpose is to eliminate keystrokes
and potential compatibility problems.
Additionally, data rates not covered by the given network
specification of operation will not be allowed. If the
mode of operation is selected after the data rate has
been entered, then the data rate must be compatible
Web Browser/Remote Protocol
6-16
Advertisement
Table of Contents
