Table of Contents
Advertisement
OM20 Universal Outdoor Modem
1.1.1 Features/Options Installed at Time of Order
Features installed at the time of ordering are the options pre-installed/initialized in the factory prior
to shipment. Features and options can be reviewed from the GUI or remote port of the OM20.
Refer to Section 4, "User Interfaces" for information on how to view these features. Factory
installed options are chassis and board configurations that are introduced during manufacture.
These options include (Options are subject to change):
Input Power: AC 2-5 W BUC (24VDC), AC 8-10W BUC (48 VDC),
Input Power: DC 2-5 W BUC (24VDC), DC 8-10W BUC (48 VDC)
Data Rate: 5 Mbps (standard), optional 10, 20 Mbps
Interface: EIA-530 (standard), Optional Ethernet, G.703, ASI
M&C Interface – SNMP Ethernet/Web Browser – RS485, RS232
Viterbi Codec (standard), Optional Sequential Codec
Optional Custom Reed Solomon
Optional IBS, IDR, Drop and Insert
Optional External Reference Input Connector
Modulation: BPSK, QPSK, OQPSK (standard), Optional 8PSK, 16 QAM
Optional Turbo, 5Mbps, 20Mbps
Sequential Codec, and custom programmable Reed Solomon.
Optional OM73
Optional DVB
Optional Cable, Waveguide, Mounting Kits
M&C Interface – SNMP, Ethernet/Web Browser, RS485, RS232
1.1.2 Software Feature Upgrades
Software Feature Upgrades are a simple and quick way of changing the feature set of an installed
modem. Feature upgrades are how most OM20 options are implemented. Features may be
purchased at any time by contacting a Radyne Corp. salesperson. Refer to Appendix B for
information on how upgrade features.
1.1.3 Future Hardware Options
Hardware options (Refer to Appendix A) are purchased parts that can only be installed at a
Radyne Facility. Please contact the Radyne Corp. Customer Service Department for information
not limited to availability and to shipping costs.
Only authorized service personnel should handle and install optional
hardware options.
TM116 – Rev. 1.2
Introduction
1-3
Advertisement
Table of Contents
