Table of Contents
Advertisement
OM20 Universal Outdoor Modem
BUC ADDRESS
BUC OUTPUT
FSK TEST
TM116 – Rev. 1.2
AMPLUS:
Enables the FSK communication link for AMPLUS
BUCs only. This feature enables the DMD20LBST to
retrieve and display certain BUC parameters on the front
panel of the modem.
{xxxx}
Allows the user to enter the BUCs address for FSK
communications. Modem may be able to retrieve
address through the FSK Query for Address Test menu.
{ENABLED, DISABLED}
Allows the modem to enable and disable the output of
the BUC via FSK command
{NONE/LOOPBACK/CYCLE TX ENABLE/QUERY FOR
ADDRESS/PASS THRU}
(Only available when the FSK Comm is Enabled)
NONE:
This is the none FSK operational mode.
LOOPBACK:
The FSK will initiate an internal loopback test of the FSK
transmitter and receiver verifying that the modem
communication link is functioning properly.
CYCLE TX ENABLE:
The modem will initiate a test of the FSK between the
modem and BUC. The LBST will enable and disable the
BUC RF output and verify that the commands are
properly received and accepted by the BUC and the
modem. If communications are lost, LBST will initiate a
fault.
QUERY FOR ADDRESS
The modem will initiate a FSK query requesting BUC
address.
PASS THRU:
Allows the user to communicate with the BUC utilizing
the BUCs message protocol
Web Browser/Remote Protocol
6-24
Advertisement
Table of Contents
