Table of Contents
Advertisement
OM20 Universal Outdoor Modem
D.4.2 Boot Mode Options (Reference only)
Boot Modes selections are based on the networks requirements needed for setting up the Web
browser. Refer to the manual for more specific details.
Boot Mode options are:
DEFAULT:
BOOTP:
NON-VOL:
IP TEST:
TM116 – Rev. 1.2
During initialization (boot up), the modem will restore the web setting to
the standard IP Mask and addresses supplied by the modem. The
modem will be taken off the network and will not be accessible. The
Default settings are:
IP Address Mask:
Modem IP Address:
Server IP Address:
Router IP Address:
During initialization (boot up), the modem will get the names, masks, and
IP Addresses of the modem, router, and server.
Stores and uses IP Mask and addresses as provided by the user.
Stores and uses IP Mask and addresses to fixed settings as listed below.
Bootp Server Tag:
IP Address Mask:
Modem IP Address:
Server IP Address:
Router IP Address:
255.000.000.000
010.000.000.001
010.001.001.001
010.000.001.001
206
255.255.255.000
192.168.0.238
192.168.000.101
192.168.000.102
Appendix D
(FF.00.00.00 hex)
(C0.A8.00.EE hex)
(0A.01.01.01 hex)
(0A.00.01.01 hex)
(FF.FF.FF.00 hex)
(C0.A8.00.EE)
(C0.A8.00.65)
(C0.A8.00.66)
D-
8
Advertisement
Table of Contents
