Led Indicators - Radyne OM20 Installation And Operation Manual

OM20 Universal Outdoor Modem

6.1.3 LED Indicators

Twelve LEDs on the OM20 GUI Interface (Refer to Table 6-2) indicate the status of the OM20's
operation. The LED colors maintain a consistent meaning. Green is appropriate for normal
operation, Yellow means that there is a condition not proper for normal operation, and Red
indicates a fault condition that will result in lost communications.
LED
Power
Fault
Event
Remote
Transmit On
Major Alarm
Minor Alarm
Test Mode
Signal Lock
Major Alarm
Minor Alarm
Test Mode
TM116 – Rev. 1.2
Table 6-2.
Color
Modem LED Indicators
Green Indicates that the unit is turned on.
Red Indicates a hardware fault for the unit.
Yellow Indicates that a condition or event has occurred that the
modem has stored in memory. The events may be viewed
from the GUI or in the Terminal Mode.
Green Indicates that the unit is in the process of updating firmware
with FTP.
Modulator LED Indicators
Green Indicates that the Modulator transmitter is on.
Red Indicates that the Transmit Direction has failed, losing traffic.
Yellow Indicates that a Transmit Warning Condition exists.
Yellow Indicates that the transmitter is involved in a current Test
Mode activity.
Demodulator LED Indicators
Green Indicates that the receiver locked to an incoming carrier and
data, including FEC Sync.
Red Indicates that the Receive Direction has failed, losing traffic.
Yellow Indicates that a Receive Warning Condition exists.
Yellow Indicates that the receiver is involved in a current Test Mode
activity.
Web Browser/Remote Protocol
Function
6-4